Propellerhead Reason - 4.0 Manual de operaciones descargar pdf (Pagina 168)

THE MIXER

166

The Mixer signal flow

The basic signal flow for a channel in the Mixer is as follows:

Note that the Solo function is true “in-place” solo, meaning that if the channel uses

Auxiliary sends routed to effect devices, the soloed output signal will also include the

soloed channel(s) including any Aux Send effects.

Note also that if the pre-fader send mode is activated for Aux 4 the send is tapped af-

ter the EQ and Pan controls but before the channel fader.

About the EQ modes

With Reason 2.5, the EQ modules in the Mixer were improved to get an even better

sound and character. However, if you want to play back songs made in previous Rea-

son versions, you may want to use the “old” EQ mode to ensure that the songs sound

exactly the same.

On the back of the Mixer you will find a switch for this - select “Improved EQ” for the

new EQ types or “Compatible EQ” for the old-style EQ. The parameters are exactly

the same in both cases.

The Auxiliary Return Section

The Auxiliary Returns provide an “extra” four stereo inputs in addition to the Mixer’s 14

stereo channels. The main function of Return channels is to provide inputs for con-

nected Send effects devices. Each Aux Return channel has a level control, and a

read-only tape label that display the name of the device connected to the Return

channel.

The Master Fader

The Master L/R fader controls the summed output level of all channels in the Mixer.

Use this to change the relative level of all channels, to make fade-outs etc.

FaderEQ Mute AUX Sends

Solo Master L/R Output

Effects DevicesAUX Returns

Input

Aux 4 pre-fader

mode

Pan

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 401 402

Sin comentarios

Propellerhead Reason - 4.0 Manual de operaciones Pagina 168