Propellerhead Reason - 1.0.1 Manual de operaciones descargar pdf (Pagina 87)

THE MIXER

Connections

All input and output connectors are as usual located on the back panel of the

Mixer 14:2. Special connectors are used for “chaining” two or more Mixers

together. This is described on page 86.

Mixer Channel Connections

➜ Each mixer channel features stereo left/right inputs for connecting

audio devices.

Use the left input when manually connecting a mono signal source.

➜ In addition, there are two Control Voltage (CV) inputs (with associ-

ated voltage trim pots), for voltage controlling channel Level and

Pan from other devices.

Auxiliary (AUX) Send Out

➜ There are four mono Send Out connectors, which normally are used

to connect to the inputs of effect devices.

When a Send is connected to an effects device, the corresponding AUX

Send knob determines the level of the signal sent to the effect device for

each channel. The Send Output is taken post-channel fader.

! Note that some effects (for example the Comp-01 compressor or the

PEQ2 parametric EQ) are effect types which are not designed to be

used as AUX Send effects, but rather as insert effects, where the

whole signal is passed through the effect.

Auxiliary (AUX) Returns

➜ There are four stereo Return input connectors.

These are normally connected to the left and right outputs of effect de-

vices.

Master Left/Right Outputs

➜ The Master outputs are auto-routed to the first available input pair

on the Audio Hardware interface.

This in turn sends the audio to the outputs of your audio hardware.

✪ Note that the Master outputs don’t have to be routed directly to the

Audio Hardware Interface. You could for example route the Master

outputs to an effect, and then route the effect outputs to the Hard-

ware Interface instead.

➜ In addition, there is a Control Voltage (CV) input (and an associated

trim pot), for voltage controlling the Master Level from another de-

vice.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 206 207

Sin comentarios

Propellerhead Reason - 1.0.1 Manual de operaciones Pagina 87