Propellerhead Reason - 1.0.1 Manual de operaciones descargar pdf (Pagina 46)

ROUTING MIDI TO REASON

➜ If you want to manually play (i.e not recorded MIDI data) Reason de-

vices in real time from inside another sequencer program, MIDI thru

must be activated.

MIDI thru is when incoming MIDI is echoed out via the MIDI output. If you

don’t know how to do this, refer to the program’s documentation. You will

also need to make sure that the other application is “thruing” it’s data to

the correct MIDI port and on the right MIDI channel.

Bypassing the sequencer completely

It is possible to use Reason devices purely as “sound modules”, bypassing

the Reason sequencer completely. To do this, you should use the External

Control busses to receive MIDI, and deselect the Sequencer port in the Pref-

erence dialog.

Once you have set up communication between Reason and the other device

or application, you can hide the sequencer from view, by clicking the “maxi-

mize rack” button at the top of the rack’s vertical scrollbar.

Sending Controller Data via MIDI

It is possible to send controller data from an external sequencer to control

Reason parameters. Just set up your external device to transmit the correct

MIDI controller messages on the right MIDI channel.

To find out which MIDI Controller number corresponds to which control on

each device, please see the “MIDI Implementation Charts.pdf” document.

Once you have located the controller numbers and set everything up, you

can record and edit the controller data in the external sequencer as you nor-

mally do, and the Reason parameters will react correspondingly.

✪ Do not confuse Remote Control and direct MIDI control. MIDI Re-

mote allows you to map any MIDI Controller to any control on the

front panel, but is primarily intended for “live” tweaking of parame-

ters during playback.

Recording Pattern changes

As specified in the MIDI Implementation, MIDI Controller #3 can be used to

switch patterns in a device. However, pattern changes activated this way oc-

cur immediately (not at the end of the bar), which may or may not be what

you prefer.

Please see page 8 for information on recording and editing pattern changes.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 206 207

Sin comentarios

Propellerhead Reason - 1.0.1 Manual de operaciones Pagina 46