Propellerhead Reason - 3.0 - Control Surface Details Guía de usuario descargar pdf (Pagina 7)

Doepfer

Drehbank

Requirements/Setting up:

• To use the Drehbank with Reason, you need to select Bank 2 and make sure this

isn't changed from the factory default settings.

• You can reset the Drehbank to factory default settings in the following way:

Keep the Snap button pressed while you turn on the Drehbank. The Snap LED will

now be off and the two other LEDS (Bank 1 and Bank 2) will be lit. Release the

Snap button and press the Bank 2 button to select Bank 2.

• The Drehbank can not be auto-detected by Reason; you have to add it manually by

clicking the Add button on the Control Surfaces and Keyboards page, and select-

ing the control surface from the Manufacturer and Model menus.

Pocket Control

Requirements/Setting up:

• To use the Pocket Control with Reason you need to select preset 0 and make sure

this isn't changed from the factory default settings.

• To select preset 0, set all DIP switches on the back to "off".

• If you have changed the settings in preset 0, you will have to restore it using the

editor supplied with your Pocket Control. Please refer to your Pocket Control man-

ual for information on how to use the editor.

• The Pocket Control makes use of keyboard shortcut variations for many Reason

devices.

Pocket Dial

Requirements/Setting up:

• To use the Pocket Dial with Reason you need to select preset 85 and make sure

this isn't changed from the factory default settings.

• To select preset 85, set the DIP switches on the back to 00101010, where "0" is

"off" and "1" is "on".

Finally, make sure Bank 1 is selected on the Pocket Dial.

• If you have changed the settings in preset 85, you will have to restore it using the

editor supplied with your Pocket Dial. Please refer to your Pocket Dial manual for

information on how to use the editor.

• The Pocket Dial makes use of keyboard shortcut variations for many Reason de-

vices.

Pocket Fader

Requirements/Setting up:

• To use the Pocket Fader with Reason you need to select preset 0 and make sure

this isn't changed from the factory default settings.

• To select preset 0, set all DIP switches on the back to "off".

• If you have changed the settings in preset 0, you will have to restore it using the

editor supplied with your Pocket Fader. Please refer to your Pocket Fader manual

for information on how to use the editor.

• The Pocket Fader makes use of keyboard shortcut variations for many Reason de-

vices.

Regelwerk

The Regelwerk is defined as having a keyboard (even though it hasn't, obviously). This

is to make it possible to use the sequencer in the Regelwerk to "play" Reason. How-

ever, when you add the Regelwerk as a control surface in Reason, it may automati-

cally become the Master Keyboard (if you have no other keyboard connected and

added at the time). If this is not what you want, just select the Regelwerk in the control

surface list and click "Use No Master Keyboard".

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Comentarios a estos manuales

Sin comentarios

Propellerhead Reason - 3.0 - Control Surface Details Guía de usuario Pagina 7

Comentarios a estos manuales