Propellerhead Reason - 1.0.1 Guía de inicio rápido descargar pdf (Pagina 48)

MANAGING THE RACK

Manual Routing

To connect devices manually, you need to flip the rack around to see the

back. This is done by pressing [Tab] or selecting “Toggle Rack Front/Rear”

from the Options menu.

On the back of each device you will find connectors of two different types:

audio and CV (Control Voltage, used for controlling parameters - see the

electronic documentation). Audio inputs and outputs are shown as large

“quarter inch” jacks, while CV input and output jacks are smaller. For now,

we stick to audio connections.

! When the back is shown, you can still navigate in the rack by scroll-

ing, by using the computer keyboard, etc (see page 42).

There are two ways to route audio from one device to another: by connecting

“virtual patch cables” between inputs and outputs, and by selecting connec-

tions from a pop-up menu:

Using Cables

! For the cables to be visible, the option “Show Cables” must be acti-

vated on the Options menu. See below.

1. Click on the desired input or output jack on one of the devices, and

drag the pointer away from the jack (with the mouse button

pressed).

A loose cable appears.

2. Drag the cable to the jack on the other device.

When you move the cable end over a jack of the correct type (audio/CV,

input/output) it will be highlighted to show that a connection is possible.

3. Release the mouse button.

The cable is connected. If both input and output are in stereo and you

connect the left channels, a cable for the right channel is automatically

added.

✪ To give a better overview of the connections, the cables have differ-

ent colors. Connections to or from effect devices are different

shades of green, other audio connections are different shades of

red and CV connections are different shades of yellow.

Audio connectors

CV connectors

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 92 93

Sin comentarios

Propellerhead Reason - 1.0.1 Guía de inicio rápido Pagina 48