Propellerhead Reason Especificaciones descargar pdf (Pagina 197)

DR. REX LOOP PLAYER

195

Connections

On the back panel of Dr.Rex you will find the connectors, which are mostly CV/

Gate related. Using CV/Gate is described in the chapter “Routing Audio and

CV”.

Audio Outputs

These are the main left and right audio outputs. When you create a new Dr.Rex

device, these are auto-routed to the first available channel on the audio mixer.

Slice Gate Output

This outputs a gate signal for each triggered slice in the loop.

Modulation Inputs

These control voltage (CV) inputs (with associated voltage trim pots), allow you

to modulate various Dr.Rex parameters from other devices (or from the modula-

tion outputs of the Dr.Rex device itself). The following CV inputs are available:

• Osc Pitch.

• Filter Cutoff.

• Filter Resonance.

• Amp Level.

• Mod Wheel.

Modulation Outputs

The Modulation outputs can be used to voltage control other devices, or other

parameters in the Dr.Rex device itself. The Modulation Outputs are:

• Filter Envelope.

• LFO.

Gate Inputs

These inputs can receive a CV/gate signal to trigger the two envelopes. Note

that connecting to these inputs will override the “normal” triggering of the enve-

lopes. For example, if you connected an LFO CV output on another device to the

Gate Amp input on the Dr.Rex, the amplitude envelope would not be triggered

by the incoming MIDI notes to the Dr.Rex device, but by the LFO CV signal. In

addition you would only hear the LFO triggering the envelope for the slices that

were playing at the moment of the trigger.

• Amp Envelope

• Filter Envelope

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 297 298

Vikitvv 04 Jan 2024 | 12:04:50

urenrjrjkvnm

Evabhf 07 Jan 2024 | 15:01:45

Med

Viktoridbv 13 Jan 2024 | 23:33:23

Cinema

Propellerhead Reason Especificaciones Pagina 197